Call us 24/7
Watch our company video

Heat Recovery Ventilation Unit

Heat recovery unit maintenance, repair, and installation in York, Wakefield, Doncaster, and Goole.

Air Conditioning, Ventilation and Refrigeration

Heat Recovery Ventilation Unit

A heat recovery unit with clogged filters keeps running, just badly: less fresh air in, more electricity used. A unit in that state isn’t in efficient working order, which is what the Workplace (Health, Safety and Welfare) Regulations 1992 require of mechanical ventilation.

Robinsons Facilities Services keeps commercial MVHR units serviced and repaired across Yorkshire and the Humber, and installs new ones where old plant has had its day. Our engineers and specialist partners work to SFG20-based schedules and leave a service record you can show an auditor or insurer.

  • Annual servicing from £250+VAT per unit
  • PPM contracts from £385+VAT/year
  • Filter changes from £100+VAT

Get a quote for heat recovery ventilation →

Prefer to speak to someone? Call us on 01423 226578 →

A heat recovery ventilation unit, usually called MVHR (mechanical ventilation with heat recovery), supplies fresh air and extracts stale air through a heat exchanger, so warmth from the outgoing air pre-heats the incoming supply. Keeping it efficient usually means an annual service, with filters inspected and changed more often.

MVHR, HRV, and heat recovery units: one system, several names

MVHR and HRV describe the same thing: a ventilation unit that recovers heat from extract air before it leaves the building. You’ll also see it called a heat reclaim unit or a heat recovery ventilator. Most packaged commercial units use a plate heat exchanger, where the two airstreams pass each other without mixing.

Larger air handling units often include a heat recovery section too, either a plate or a thermal wheel. That plant is covered on our AHU maintenance page. This page deals with standalone MVHR units in offices, schools, care homes, and similar buildings.

What the law requires for heat recovery ventilation

Regulation 5 of the Workplace (Health, Safety and Welfare) Regulations 1992 names mechanical ventilation systems specifically. They must be maintained, including cleaned as appropriate, in an efficient state, in efficient working order, and in good repair, under a suitable system of maintenance. HSE’s ACOP L24 explains how to meet it.

The law does not set a service interval. What it requires is that system of maintenance, and the practical way to show you have one is a planned schedule with a written record of each visit.

New and replacement systems in England also fall under Approved Document F Volume 2, which covers commissioning and the information handed over to the building owner once the work is done.

What an MVHR service includes

Each visit follows an SFG20-based task list and ends with a written report. A typical service covers:

  • Filters: inspected and replaced to the manufacturer’s specification
  • Heat exchanger: checked for dirt and damage, and cleaned where the manufacturer allows
  • Fans and motors: checked for noise, wear, and correct running
  • Condensate drain: cleared and tested so water drains away instead of leaking into the ceiling
  • Bypass and controls: tested so the unit switches between heat recovery and summer bypass as it should
  • Service report: condition, findings, and any remedial work we recommend

We work on units from manufacturers including Vent-Axia, Nuaire, Zehnder, Vaillant recoVAIR, and EnviroVent.

Heat recovery unit repairs

Most faults show up as a complaint before anyone looks at the unit: stuffy rooms, condensation on windows, a fan that’s suddenly loud, or water where it shouldn’t be. 

The faults behind them are usually one of these:

  • Filter alarms that won’t clear after a change
  • Failed or failing supply and extract fans
  • Blocked condensate lines and leaks
  • Bypass dampers stuck open or shut
  • Controller faults and error codes

We attend during business hours, find the cause, and confirm the cost before any repair goes ahead as quoted works.

Commercial MVHR installation and replacement

We install new heat recovery units and replace ones that have reached the end of their working life. Retrofitting into an occupied building is often possible, as long as there’s space for the unit and its ductwork. Every job starts with a site survey to confirm what’s practical.

Installation includes commissioning and the handover information Approved Document F expects, so the system starts life with a documented baseline for future servicing. Each job is priced as quoted works, with a fixed, itemised quote before work begins.

Pricing

Servicing is priced per unit, so the cost scales with the number of units on site. Sites with several units, or that want filters handled between services, usually get better value from a contract.

Annual servicing: from £250+VAT per unit

A full service visit covering the checks above, with a written report on each unit.

Get a quote for heat recovery ventilation →

Filter changes: from £100+VAT

A standalone visit to replace filters between annual services, useful for units in dusty or high-traffic locations.

Get a quote for heat recovery ventilation →

PPM contracts: from £385+VAT/year

Scheduled servicing across your units, with filter changes planned in at the interval they need, plus priority response (typically within four hours during business hours) and preferential rates on repairs. Terms run from 12 months to five years.

View our PPM contract →

Repairs and installation: quoted works

Repairs and new installations are quoted after diagnosis or survey, with a fixed, itemised price before anything starts.

View quoted works →

How we support you

Robinsons Facilities Services looks after heat recovery units alongside the heating and air conditioning plant around them, so one supplier holds the whole picture and one set of records. We schedule visits around your occupancy and handle access, and contract customers can view their records through our customer portal.

Contract customers also have access to our 24/7/365 out-of-hours call-out facility. This is a separate service available to PPM contract customers only.

We’re SafeContractor approved, CHAS accredited, and hold UKAS ISO 9001 certification.

Get a quote for heat recovery ventilation →

Prefer to speak to someone? Call us on 01423 226578 →

calculator icon

Curious how much it costs to maintain your building?

100% Online. No Obligation.

Heat Recovery Ventilation Unit FAQs

Commercial MVHR servicing starts from £250+VAT per unit for an annual service visit. Filter changes between services start from £100+VAT, and PPM contracts covering scheduled servicing across a site start from £385+VAT a year. The final figure depends on the number of units, their size, and access. Send us an enquiry or call us on 01423 226578 for a fixed price.

Once a year is the usual baseline, with filters looked at more often. Units in dusty or heavily used buildings may need a second visit. We set the interval for each unit from its condition and the manufacturer’s guidance, then build it into an SFG20-based schedule.

No law sets a fixed service interval. But the Workplace Regulations 1992 do require mechanical ventilation in workplaces to be properly maintained and kept in good repair. Written records from a planned schedule are your evidence that the duty is being met.

Most units need filters checked every three to six months and replaced every six to twelve, depending on the unit and the manufacturer’s guidance. Sites near busy roads or with high pollen levels sit at the shorter end. A clogged filter cuts airflow and makes the fans work harder, so a missed change shows up in your running costs.

MVHR stands for mechanical ventilation with heat recovery. Fans bring in fresh air and remove stale air, and a heat exchanger passes warmth from the outgoing stream to the incoming one.

Generally not. Many units have a summer bypass that routes incoming air around the heat exchanger when the building is warm enough, so ventilation carries on without recovering heat you don’t want. Switching the unit off stops the fresh air supply altogether. If rooms overheat in summer, get the bypass and controls checked.

Often, yes. The main constraint is space: the unit and its supply and extract ductwork need a route through ceilings, risers, or plant areas. A site survey confirms what’s practical before we quote.

It depends on the building, the size and number of units, and how much ductwork is needed, so installation is quoted individually after a site survey. You get an itemised, fixed price up front. Send us an enquiry or call us on 01423 226578 to arrange a survey.

Yes. Air handling units with a plate or thermal wheel heat recovery section belong to our AHU maintenance page, which deals with the whole unit rather than the heat recovery section alone.

Usually, where a building is occupied for long hours. The unit recovers warmth that would otherwise leave with the extract air, which cuts the heating load of bringing fresh air in. The return depends on running hours, heating costs, and how well the unit is maintained. Our guide to the real ROI of a heat recovery system goes into the numbers.

Last updated: 25/09/2026

icon phone animated

Call our Yorkshire Head Office about Heat Recovery Ventilation Unit

  • Fast Response Times
  • Coverage Throughout Yorkshire
  • Highly Accredited Commercial Engineers

Contact Us Today about Heat Recovery Ventilation Unit!

Accreditations See our full list of accreditations Accreditations

Regular industry news and company updates, delivered straight to your inbox.

  Information on how we handle your data is contained in our Privacy Policy